PLX Devices AFR Wideband Sensor Module With DM-6 Multi Gauge (GEN4)Rated 5/5 based on 1 reviews.
The PLX Wideband AFR (UEGO) gauge combo combines an accurate, fast response wideband AFR (Air Fuel Ratio) controller with the world's most advanced touch screen 2 1/16" gauge (52mm). It includes a Bosch LSU4.9 wideband oxygen sensor. The wideband controller (SM-AFR) works with gasoline, bio diesel, ethanol, methanol, E85, LPG, and CNG. It includes two analog outputs (wideband 0-5V, and narrowband 0-1V) for interfacing with 3rd party devices and one digital serial output for interfacing with the DM-6 gauge and other Multi Gauges. The wideband analog output is ideal for interfacing with aftermarket ECU's and data loggers. The narrowband output is ideal for stock narrowband oxygen sensor replacement where the simulated narrowband analog output is fed back into your ECU to make it operate as if the stock narrowband oxygen sensor is still installed while running the PLX wideband setup. All three outputs can be used simultaneously. Additional features include advanced soft start technology which prolongs the oxygen sensor's life and an aluminum enclosure for durability and reliability.
The Gen4 employs the innovative PLX Devices new intelligent health monitoring technology where the oxygen sensor is meticulously monitored every 2mS (488 times per second) to obtain peak performance, accuracy and reaction time. Coupled with the updated patented DM-6 touch screen MultiGauge, battery voltage is displayed from 9V-20V, sensor life is displayed from 0-100%. The oxygen sensor reaction time is displayed from 10mS/1000mS on the brilliant high contrast OLED display.
Gen3 vs. Gen 4
- More accurate
- Uses only 7.5Watts compared to 10Watts
- Faster response time
- Improved sensor durability
- Faster warm up time
- Maintains accuracy throughout life
- Less susceptible to contamination to surrounding pollution
- 10+ years of average service life
- New Sensor: Improved reliability, reaction time, warm up time, and reduced power consumption
- New Parameters: O2 Sensor Health, O2 Sensor Reaction Time, Voltage
- New Bosch LSU 4.9 Sensor
- Plug and play controller and gauge combo
- No Calibration Required
- Soft start technology
- 2 analog outputs
- 1 digital input, 1 digital output
- Compatible with multiple fuels
- Accurate to 0.1 AFR resolution (gasoline)
- SM-AFR main unit
- Bosch LSU 4.9 wideband sensor
- O2 sensor harness 10ft
- 4ft power wire with 2.1mm connector
- 4ft Analog wires and connector with 4 terminals
- 1ft Serial Cable
- Termination jumper
- User Manual
- DM-6 2 1/16" (52 mm) Gauge
- 4 Pin connector for SM-AFR connectivity
- 2 Terminals for 4 pin Connector
- *O2 Bung and Cap Sold Separately
Delivery & Returns
99% of orders are dispatched from our Melbourne warehouse within 24 hours after payment is cleared. All orders are shipped with Australia Post e-Parcel with tracking and signature on delivery.
Express shipping is available at additional cost. For next day delivery, please ensure your postcode is within Australia post Next Day Delivery network.
We offer 30 days money back guarantee on all orders. If your item was purchased in error, or you've simply changed your mind, it may not be too late for a refund. The item must be returned in original re-saleable condition - Not opened, used or damaged and ready to be put back on the shelf.
All products supplied by Fuel Economy Solutions Pty Ltd come with 12 months limited warranty unless otherwise specified. Warranty covers defects in materials and/or workmanship. If a defect arises and a valid claim is received, Fuel Economy Solutions Pty Ltd may at its option repair or replace the product.
Naturally the warranty cover does not extent to cover damage caused by normal wear and tear, accidents, misuse, lack of maintenance, neglect, natural disaster, or other external causes; to damage caused by operating the equipment in a manner outside that described in the instructions.
Absolutely Excellent WidebandBy: Liam on 28 August 2017This little gauge is feature packed for its size, super easy to install and the menus are really simple to navigate when driving. I really like the live graph showing AFR as well as being able to see the health of the sensor whenever you want to check. Voltage monitoring is also very useful instead of factory volt meters that aren't as precise. I would recommend this to anyone with a turbo/supercharger car as a great diagnostic tool.