The Hantek 2D82 is an innovative automotive handheld diagnostic tool offering over 80 possible tests on vehicles. It features a powerful 2 channel oscilloscope, a universal digital multimeter and a signal source 1CH wave form generator. In addition it allows testing sensors, start & charge, actuators, ignition and more. The tool also features an HD colour LCD screen display with minimalist keyboard design and simple operations for easy use. A truly great value for any workshop for better and more efficient diagnosis. 

Diagnostics Functions

  • Sensors: intake manifold vacuum degree & ignition, lampblack adjustment valve vacuum degree & ignition, exhaust ignition (idle), exhaust ignition (start).
  • Start & Charge: Charging circuit, current and voltage.
  • Actuator: Petrol / Diesel.
  • CAN-Bus: CAN bus data observation, CAN bus signal integrity, CAN bus LH long-term acquisition, LIN bus.
  • Sensors: air flow meter, camshaft, crankshaft, distributor, lambda sensor, throttle position.
  • Ignition: Primary/Secondary.

Oscilloscope Functions

  • 2 Channels oscilloscope, 80MHz bandwidth, 250M sampling rate
  • 10mV-10V/DIV high input sensitivity and large input range
  • Auto automatic measuring function
  • Adjustable backlight brightness, backlight duration, and auto power off time
  • Cursor measurement reference waveform, waveform storage function
  • Colour highlight LCD screen
  • Powered by two universal ICR18650 lithium battery only, able to work continuously for a full day and standby for weeks
  • Digital voltmeter function
  • Key tone settings
  • Full function PC software

Digital MultiMeter Functions

  • Multi-functional digital multimeter to measure AC/DC voltage, current, resistance, diode, capacitance, continuity and On/Off test. 

Signal Simulator Functions

  • 1 channel arbitrary/function waveform generator
  • 250MSa/s sampling rate
  • 12 bits vertical revolution
  • output sine wave, square wave, triangle wave, trapezoidal wave and arbitrary wave
  • Sine: 1Hz-25MHz / Square: 1Hz-10MHz / Triangle: 1Hz-1MHz / Trapezoid: 1Hz-5MHz 
  • Frequency resolution: 1Hz
  • Output impedance: 50Ω

Package Includes

  • 1 x Main Unit
  • 1 x Tool Case
  • 1 x Type C Cable
  • 1 x Power Adaptor
  • 1 x Multimeter Probe
  • 2 x Test Leads with BNC Plug and Alligator Clip HT324
  • 1 x Automotive Test Leads HT30B
  • 1 x Automotive Ignition Probe HT25
  • 1 x Acupuncture Probe Set HT307
  • 1 x Coil-on-Plug Extension Cord HT308
  • 1 x 20:1 Attenuator HT201
  • 2 x Automotive Test Leads HT30B
  • 2 x Automotive Ignition Probes HT25
  • 2 x Acupuncture Probe Sets HT307
  • 2 x Coil-on-Plug Extension Cords HT308
  • 2 x 20:1 Attenuators HT201
  • 2 x Large Dolphin/Gator Clips HT18A
  • 1 x Breakout Leads HT301
  • 1 x 6 Way Breakout Leads HT306-2.8mm
  • 1 x 6 Way Breakout Leads HT306-2.3mm
  • 1 x 6 Way Breakout Leads HT306-1.5mm
  • 1 x 6 Way Breakout Leads HT306-1.0mm
  • 1 x 65A AC/DC Current Clamp CC65
  • 1 x 650A AC/DC Current Clamp CC650

Specifications

Diagnostic tests require suitable accessories. Please check available kits and accessories included with the kit. Accessories are also sold separately

  • Works with all OBD-II compliant vehicles
  • Supports all OBD2 protocols
  • Software included for Windows PC
  • Connecting to your iPhone / iPod touch /iPad is made by WIFI connection in adHoc mode
  • Range: 10m (Line of sight)
  • Power Consumption: 0.75 Watts (With Power Switch)
  • Physical Dimensions: 2.75 x 1.25 x 1.2 inches
  • CLK is capable of communicating with vehicles which adopt following protocols: ISO 9141, ISO 11898(aka. CAN), ISO 14230(aka. KWP2000), ISO 15765(aka. CAN), SAE J1939
SKU H2D82K3
Barcode # Does Not Apply
Brand Hantek
Shipping Weight 0.2500kg
Shipping Width 0.120m
Shipping Height 0.050m
Shipping Length 0.200m
Unit Of Measure ea

Responsive Adaptor

19 July 2017
It was a little step into the unknown buying this adaptor as I had read a few bad reviews about dropping out and disconnecting, but I'm pleased to say that the adaptor has excelled my expectations. The connection is almost instant, I have never experienced any connection problem with my iPhone(7) and would recommend it to anyone that asks. I use it in conjunction with DashCmd for iOS (and Android) and it is brilliant. DashCmd provides access to a ton of accessible and customisable outputs and because I switch it into the background while driving long distances, I occasionally switch back to it and the re-connection is almost instant. One last thing - being able to switch the adaptor off is very handy too helping save battery while your car is parked.
(5)

OBD2 scan tool

By: on 24 May 2016
Great product to monitor parameters very easy to use
(5)

Write a product review

Product History